How to Smooth Uneven Walls Easily

Curious how to smooth uneven walls? The wall is indeed the most important part in a building, both inside the house and inside the building. The wall not only serves as a barrier and protector, but also can be a fun and pleasing place to look.

 



How to Smooth Uneven Walls


When the wall is cracked, perforated, or becomes uneven, of course this is a problem in itself. This defect in addition to making the walls not sturdy and easily damaged, the walls also become less pleasing to the eye. Actually, how to smooth an uneven wall is easy to do yourself without the help of a handyman, namely with the right patching process. How to? Check out the following reviews.

 

1. Check Wall Condition

As a first step smoothing uneven walls, do wall conditioning. Wall conditioning is an inspection of the walls to see if the walls are dry or not, especially for newly made walls.


This process is quite long because you will have to leave the wall for two weeks after the plastering is complete. Check periodically during this time to check for cracked or imperfect sections of the wall. Don't forget to clean it so that dust and dirt don't stick and accumulate later, which will complicate the filling process.

 

2. Make the Acian Ingredients First

The process and how to smooth the next uneven wall is to make the aciannya material. Here, there are several steps that you should pay attention to to produce a good and perfect acian, namely:


Cement powder to taste in a small bucket.

Add water little by little until the dough looks like a paste

Add more water if the cement is still solid until it looks more runny. Likewise, if it's too runny, add enough cement to thicken the dough.

Stir until evenly distributed well, then apply to the plastered wall using a special roskam.

 

3. Wet the plaster of the wall

After carrying out the process of conditioning the walls and making repairs, the process of equalizing the walls can be done by cleaning the walls first. The purpose of this wall is to make the wall clean again after a long conditioning process.


This wall process must be done properly. If you don't do this to saturation point, the plaster will absorb more air. As a result, the plaster cannot stick perfectly because the walls absorb a lot of air. This will also make the walls quickly damaged and dry. Flush the walls with clean water evenly to remove dust and dirt. Wait for it to dry to do the re-application process.


4. Pay attention to washing time and thickness

The process of scraping and smoothing this wall cannot be done automatically. You have to pay attention to the exact time to wash and also adjust the thickness carefully. Wall filling can usually be done for plastering walls that are 2-3 weeks old.


When washing, make sure not to do it too long. Because, it will make the wall easy to crack and dry. The ideal charging time is around 20-30 minutes. Periodically flatten on uneven walls. It also depends on the thickness of the coating. The ideal thickness is 1-3 mm. If it is less or more than that size, it is feared that it will reduce the quality of the acian.


5. Repaint

Finally, how to smooth uneven walls to make them look neat and clean is to repaint the walls after cleaning. However, to carry out painting, make sure the condition of the wall is dry so that the paint can absorb perfectly and not peel off.


The quality of the paint chosen must also be of the best. Especially when you do the painting on the outside of the building. heat and rain resistant paint. Apply the paint evenly on the wall that has been smoothed earlier. Wait a few moments for the paint to dry completely.


How to smooth the uneven walls in your home is easy enough for you to try yourself at home. 

Next Post Previous Post